Treasury bill laddering for startups: What to do with your cash after a funding round

Treasury

Open a business account in minutes to earn, store and spend with no minimums or monthly fees.

Learn more 
  1. Introduction
  2. Key takeaways
  3. What is treasury bill laddering for startups?
  4. Why does treasury bill laddering matter for startups after a funding round?
  5. How does bank concentration risk shape treasury bill laddering for startups?
  6. How does treasury bill laddering compare with money market funds and sweep programmes?
    1. Government money market funds
    2. Sweep programmes
    3. A treasury bill ladder
  7. How do startups build a cash policy around treasury bill laddering?
  8. What board approvals do startups need for treasury bill laddering?
  9. What tools support treasury bill laddering for startups?
  10. How Stripe Treasury can help
  11. FAQs about treasury bill laddering for startups

After a funding round, a startup might want to move some of its money out of the operating account it was deposited into. One common strategy is to keep a few months’ worth of cash in operating accounts at multiple banks, store the next few months in a government money market fund, and put the rest into a treasury bill (T-bill) ladder. A treasury bill ladder is a series of T-bills that mature on a staggered schedule so cash becomes available roughly when the business needs to spend it. Treasury bill laddering also helps businesses avoid the risks associated with concentrating funds into a single bank, as demonstrated by the Silicon Valley Bank (SVB) collapse in March 2023.

Below, we’ll go over how treasury bill laddering works for startups, how it compares to using money market funds and sweep programmes, and how to turn it into a cash policy your business’s board can approve.

Key takeaways

  • A treasury bill ladder splits a business’s idle cash (i.e., cash that’s sitting, earning little to no interest) across government-backed bills that mature on a staggered schedule. A portion becomes available roughly when the business needs it. With this strategy, a startup can earn interest on the capital it raised while keeping cash access predictable.

  • Holding cash across multiple banks and instruments limits operational vulnerability. The 2023 Silicon Valley Bank (SVB) collapse showed the danger of keeping too much of a business’s funds at one institution. Treasury bills (T-bills) are US government obligations, not bank deposits, and a second operating bank can keep payroll running.

  • Before buying treasury bills (T-bills), a business needs a board-approved cash policy that defines operating, reserve, and investment tiers in months of burn (i.e., months the business can continue operating at its current pace). The policy needs to specify: permitted instruments, how much cash can sit in any single account, and a review cadence.

What is treasury bill laddering for startups?

Treasury bill laddering for startups is an investment strategy in which a company splits its idle cash (i.e., uninvested money that is earning little to no interest) across multiple short-term US Treasury bills (T-bills) with staggered maturity dates. T-bills are short-term US government debt securities. The Treasury issues them in terms of 4, 6, 8, 13, 17, 26, and 52 weeks, sells them at a discount, and pays the full face value at maturity. Your return is the gap between the two prices. For example, if you pay US$990,000 for a US$1 million bill, you’ll receive the full US$1 million at the bill’s maturity, earning you a US$10,000 profit.

A ladder divides your investable cash into equal portions, called rungs, that mature on different dates. If you have, say, US$6 million to invest, you might buy six US$1 million bills that mature a month apart. When a rung pays out, that cash either covers the current month’s expenses or gets reinvested in a new bill at the far end of the ladder. This way, you know exactly when cash will be accessible, which matters when 18 months of payroll depend on it. And because rungs keep maturing, you can keep reinvesting at current rates every month rather than locking the whole balance into one yield (i.e., a single rate of return). Individual savers often ladder bills for income. Startups ladder them because burn rate (i.e., how quickly the company is going to run out of funds if it keeps operating at its current pace) sets the schedule.

Why does treasury bill laddering matter for startups after a funding round?

Treasury bill laddering matters after a startup has raised capital from investors because that capital has reshaped the startup’s balance sheet and risk profile overnight. Left in a business current account, those newly raised funds earn zero – or very little – interest while waiting to be spent. A ladder puts the money to work on a schedule that matches the startup’s burn rate.

This practice also mitigates risk. When SVB failed in 2023, founders saw what can happen if an entire raise sits at one bank. On top of the US$42 billion that was withdrawn from the bank on 9 March, Vice Chair for Supervision of the Federal Reserve Michael Barr later testified that another US$100 billion had been scheduled to leave the bank on 10 March. T-bills sit outside the bank. While a deposit is a claim on the bank, a T-bill is a direct obligation of the US government. Custody rules generally keep it separate from the broker’s own assets. After SVB, some venture firms told portfolio companies to split deposits across banks and move excess cash into Treasuries. Many companies that are in the seed or Series A funding stage don’t have a chief financial officer (CFO) yet, which means setting up the treasury bill laddering structure early can help create less disruption later.

How does bank concentration risk shape treasury bill laddering for startups?

Concentration risk is the chance that issues at one institution (e.g., a compliance freeze, a legal hold, the bank becoming insolvent) will cut off access to too much of your money.

Startups often end up concentrated in three ways:

  • Deposit concentration: The full amount raised during a funding round sits in one operating account because that’s where the investors wired the funds. It stays there until someone decides to move it.

  • Payment dependency: Payroll, Automated Clearing House (ACH) debits, corporate cards, and customer receipts all run through the same bank. A freeze stops money from coming in and going out.

  • Loan covenants: Venture debt agreements might require you to keep most or all of your cash at the lending bank. Read the covenant before moving funds, since a breach of its conditions can mean a default.

With a treasury bill ladder, investable cash leaves the bank’s balance sheet and sits in custody as Treasury securities. But ladders don’t touch payments, which is why many finance teams pair them with a second operating bank that can run payroll on its own and that holds funds that can cover at least one full payroll cycle.

How does treasury bill laddering compare with money market funds and sweep programmes?

Many established startups use more than one cash management instrument. When comparing money market funds, sweep programmes, and treasury bill ladders, the differences come down to what your business actually owns (e.g., T-bills, shares in a mutual fund), how fast you can get cash out, and how much work each strategy involves.

Government money market funds

Government money market funds pool investor cash and buy T-bills, other short-term government debt, and Treasury-backed repurchase agreements. Securities and Exchange Commission (SEC) rules require these funds to invest at least 99.5% of their total assets in cash, government securities such as T-bills, or fully collateralised repurchase agreements. In terms of liquidity, you typically get same-day or next-day access to cash, and yields fluctuate with short-term rates. Most money market funds seek to hold a US$1 per share net asset value (NAV), although that isn’t guaranteed.

Sweep programmes

A sweep moves any balance above a set threshold out of your operating account each night and into a designated place, such as a money market fund, or across a network of partner banks. Often, nothing changes in your day-to-day banking, but the bank picks the destination and sets the rate, which can be lower than what you’d earn buying bills or fund shares yourself. Before using this instrument, you need to ask exactly what the sweep buys and where your cash will sit overnight.

A treasury bill ladder

With a treasury bill ladder, each rung locks in a known yield at purchase and returns cash on the maturity date you choose (e.g., 4 weeks out, 13 weeks out). You can sell a bill early on the secondary market at that day’s price, although short maturities typically make little to no extra profit. T-bills take effort, because someone has to place orders, track maturities, and decide whether each rung will roll over (i.e., be used to buy more bills) or fund operations.

How do startups build a cash policy around treasury bill laddering?

A cash policy establishes board-approved parameters around liquidity and short-term investments. With one in place, a startup’s finance team can make routine money decisions without having to constantly ask for the board’s approval.

A common cash policy details the use of:

  • Operating cash: Two to three months of net burn is often held in operating accounts across at least two banks. This cash covers payroll, vendors, and any surprises.

  • Reserve cash: This is the next three to six months of expenses, and it’s often held in a government money market fund or sweep with same-day access. It replenishes operating accounts as their balances decrease.

  • Investment cash: Generally, everything else goes into a treasury bill ladder. No rung should mature later than the month you’ll need the money, and the 52-week limit on bills caps the ladder at a year out.

The written policy also needs to specify three guardrails:

  • Permitted instruments: Usually, US Treasury bills and government money market funds are allowed, while corporate bonds, longer-dated Treasuries, and structured products need explicit board approval.

  • Concentration limits: There needs to be a cap set on how much cash can sit at any single bank or fund. It’s advisable to set the cap as a percentage of the business’s total cash so it scales as the balance decreases.

  • Review cadence: It’s best practice to do a monthly check of the treasury bill ladder against your business’s cash forecast. It’s also necessary to conduct a complete review of the cash policy at least once a year and after any new financing.

When you hire faster than originally planned, your operating cash is the first tier to shrink. The treasury bill ladder’s maturity dates show you exactly when more cash will become available.

What board approvals do startups need for treasury bill laddering?

After a priced round closes, lead investors often expect the board to approve a formal corporate investment policy by written resolution to ensure newly raised capital is protected from unnecessary risk. A cash policy falls within that broader investment policy.

To satisfy investor expectations – and meet their fiduciary duties – the board needs to ensure the cash policy sets three controls:

  • Signing authority: A typical cash policy states that only two or three named officers can open bank and brokerage accounts in the company’s name.

  • Dual approval: Normally, any transfer or trade above a set amount needs a second sign-off.

  • Board reporting: A quarterly summary (the usual cadence) covers balances by institution, upcoming maturities, and yield earned.

What tools support treasury bill laddering for startups?

The US Treasury’s platform TreasuryDirect supports treasury bill laddering for startups. Businesses just need to create an entity account to get started. However, there are some limitations. Non-competitive bids are capped at US$10 million per security type and term, per auction. This means if you want to put a larger amount into T-bills (e.g., US$30 million), you’d have to do so across multiple auctions.

Many startups use a brokerage or treasury management platform that automates purchases and rollovers. A cash forecast decides what each rung does.

How Stripe Treasury can help

Stripe Treasury brings payments and finances together on Stripe, so businesses can receive, store, send, and spend funds in one place. It’s built for startups and growing businesses that want to move money faster and spend less time managing financial operations. Platforms, marketplaces, and fintechs can also offer financial services to their users with Treasury for platforms.

Treasury can help you:

  • Simplify your financial operations: Manage money, payments, card spend, payouts, and more from the Stripe Dashboard.

  • Move money faster: Access settled Stripe earnings right away and send instant transfers to other businesses on Stripe without cost.

  • Get more from your money: Earn cashback on card spend and Stripe fee credits on qualifying balances.

  • Operate globally with ease: Hold balances in multiple currencies, convert only when needed, and send payouts to recipients in 160+ countries.

  • Automate financial operations: Use agents to analyse cash flow and automate tasks such as paying invoices, moving money, and converting currencies within limits you set.

Learn more about how Stripe Treasury can help you manage your finances and payments in one place, or get started today.

FAQs about treasury bill laddering for startups

The content in this article is for general information and education purposes only and should not be construed as legal or tax advice. Stripe does not warrant or guarantee the accuracy, completeness, adequacy, or currency of the information in the article. You should seek the advice of a competent lawyer or accountant licensed to practise in your jurisdiction for advice on your particular situation.

More articles

  • Something went wrong. Please try again or contact support.

Ready to get started?

Create an account and start accepting payments – no contracts or banking details required. Or, contact us to design a custom package for your business.
Treasury

Treasury

Stripe Treasury is a banking-as-a-service API that lets you embed financial services in your marketplace or platform.

Treasury docs

Learn about the Stripe Treasury API.